2. Power Light is ON,"No beep" from speaker Please check your CPU and momory are installed normally and no oxidation at connection part .If there is any oxidation, please clean it with contact cleaner and re-install.
A note on ram: Even if you put in the cards all the way, motherboards will be really picky about boot order. For mine I had to put it in starting from the right first. It took me a while to figure out that it couldn't go left to right and only worked one way.
But yeah its hard to tell if we don't know the setup or you don't have a trouble shooting speaker.
i should clarify, we have been double triple quadruple checking every connection unfortunately, following the manual during the setup. no mobo speaker to troubleshoot but we might be able to get one today
just finished trying the power button thing and no joy
before you go resetting sht, your graphics card probably has two different ports on the back. generally they will show the screen off of both but some don't, so try plugging your screen into the other port to see if you get picture.
Are you certain you have everything connected properly? I'd do a quick double check with reference against the motherboard's manual to ensure that everything is where it should be, and that you didn't leave anything out.
Edit: Also try this: Remove your power cord and hold the Power button for 30sec - 1min. After, connect the power cord back and try again.
"Also, one last thing: make sure you're plugging your monitor into the graphics card and not the on-board graphics slots. On-board graphics don't work with Ryzen."
